RC4 Harmonized Design™ – Supported RDM PIDs

All RC4 Series 3 devices share the same firmware code-base for handling RDM messages through RC4 Harmonized Design™.  There are some minor variations for device types and available features. For RC4 Series 3 dimmers, including RC4Magic, RC4Magic-900, RC4 LumenDim, and RC4 W-DIM, these E1.37 PIDs are supported: Dimmer Curve: CURVE […]

Restoring Lost System IDs in an RC4Magic Series 2 DMXio

In some very rare cases, an RC4Magic device may lose the internally programmed Unique Private System IDs that make it part of your wireless dimming system.  Using RC4MagicPC software on a Windows PC, you can reprogram your IDs and recover from this problem. An experienced RC4MagicPC user can complete this recovery […]

How to Use RC4 S3 ColorMatch (firmware v71 or higher)

These instructions apply to all RC4 Series 3 Harmonized Design devices with firmware versions 4.071 / 2-71-x.x or later.  Applicable devices include: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500 LumenDim4, LumenDimM4 W-DIM4, W-DIMm3 RGB (red-green-blue) LED products deliver visibly different colors, due to variations in intensity and balance between […]

RC4 S3 Dimmer Mode Selection (firmware v71 and higher)

These instructions apply to all RC4 Series 3 Harmonized Design devices with firmware versions 4.071 / 2-71-x-x or later.  Applicable devices include: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500 LumenDim4, LumenDimM4 W-DIM4, W-DIMm3 Mode selection is a Func+Button feature, and the selected mode is confirmed using Patterns of Two LEDs. […]

RC4Magic Series 3 System ID Selection and LED Indication

Your RC4Magic Series 3 and RC4Magic-900 devices are programmed with four system ID codes. Three of those codes (ID0, ID1, and ID2) are unique to your system alone — when you select your ID0, it is not the same as another user’s ID0, ensuring different systems will never interfere with each other.  The remaining […]

RC4 Series 3 User Interface Nomenclature

This article outlines the terminology used in RC4 Series 3 Device User Interface (UI) Charts.  Each RC4 device has it’s own concise chart describing every feature that is accessible with the buttons and LEDs on the device. RC4 devices intentionally provide a very small user interface with a limited number of buttons.  This […]

Adjust RC4 S3 Digital Persistence Period (firmware v71 or higher)

These instructions apply to all RC4 Series 3 Harmonized Design devices with firmware versions 4.071 / 2-71-x.x or later.  Applicable devices include: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500 LumenDim4, LumenDimM4 W-DIM4, W-DIMm3 Digital Persistence period selection is a Long-Press Button Feature,and the selected period is confirmed using Patterns of Two […]

Adjust RC4 S3 Dimmer PWM Frequency (firmware v71 or higher)

These instructions apply to all RC4 Series 3 Harmonized Design devices with firmware versions 4.071 / 2-71-x.x or later.  Applicable devices include: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500 LumenDim4, LumenDimM4 W-DIM4, W-DIMm3 PWM Frequency Selection is a Long-Press Button Feature,and the selected frequency is confirmed using Patterns of Two LEDs. […]

DMXmrx Miniature Wireless DMX Receiver User Manual

  Radio Frequency Compliance RC4Magic operates in the 2.4GHz ISM band, which is harmonized for use worldwide.  Additional information is provided in the Specifications section of this manual.     Harmonized Design for a World of Choices RC4 Wireless has been making the world’s most popular low-voltage wireless dimmers since […]