Series 3 LumenDim User Manual

This is the RC4 User Manual for: RC4 Series 3 LumenDim4 (500W 4-Channel) RC4 Series 3 LumenDimM4 (Small 4-Channel) RC4 Series 3 LumenDimM2 (Small 2-Channel) RC4 Series 3 LumenDimM2Micro (Circuit Board Module) RC4 Wireless Dimming If you are unsure about what wireless dimming is used for, explore expert examples with […]

Methods for Controlling EL-Wire

Electroluminescent (EL) material delivers a very unique and recognizable look.  In simplest technical terms, it is capacitive in nature and converts AC power into light.  Increasing the AC voltage and the frequency both increase brightness — to a point.  Excessively high voltages will arc between the two conductors in the […]

DMXpix Tutorial and Demonstration

This introductory document assumes familiarity with RC4 OneTouch, RC4MagicPC, and RC4 Series 3 Harmonized Design.  A more complete User Manual for the DMXpix will be available soon.  In the meantime, do not hesitate to contact RC4 Wireless for additional information and detail if needed – we are here to help. Summary […]

DMXio 900MHz Transceiver User Manual

Wireless DMX A pair of RC4Magic-900 Series 3 DMXio units replaces a DMX data cable in lighting control applications.  Configure one device as a transmitter, and one or more devices as receivers. Any number of DMXio receivers can be used. Thus, a multi-unit RC4Magic-900 Series 3 system can take the place of […]

RC4Magic-900 Agency Certifications and Approved Antennas

  Agency Certifications for RC4Magic-900     FCC (United States) Certification   RC4Magic-900 Wireless DMX devices comply with Part 15 of the FCC rules and regulations.  These devices use RF Modules manufactured by Digi International.  RC4 Wireless is an OEM Integrator.  In order to operate under Digi International’s FCC Certification, […]

DMXmot Full Bridge Power Driver User Manual

Start with Basic Wireless Dimming Before you can make use of this guide, you need your RC4 Wireless system up and running in basic wireless dimming mode.  To get started with RC4Magic Series 3, review the RC4Magic Series 3 Quick Start Guide first.  The RC4Magic DMXmot is not available as […]

Remote Device Configuration Using RC4MagicPC Software

Start with Basic Wireless Dimming Before you can make use of this guide, you need your RC4 Wireless system up and running in basic wireless dimming mode.  Find the RC4Magic Series 3 Quick Start Guide at: http://www.theatrewireless.com/support/manuals/ For sophisticated DC servo motor control with the DMXmot, RC4MagicPC configuration software is […]

Resolve Connection Problems

Simple Steps to Reconnect   This document focusses on the 2.4GHz RC4Magic system.  Some details, particularly LED indicators like RFcon, will vary when using RC4Magic-900.     Be sure the transmitter, usually a DMXio, is set for transmitter mode.Two indicator LEDs confirm this setting: The Tx/Rx (Series 2) or COP […]

RC4 OneTouch To Set DMX Channels and Dimmer Curves

These instructions apply to all RC4 Series 3 Harmonized Design devices, including: RC4Magic Series 3 and RC4Magic-900 DMX2dim, DMX4dim, DMX4dim-500 LumenDim4, LumenDimM4 W-DIM4, W-DIMm3 DMX channel and curve selection is a Single-Press Button Feature as described in detail in http://rc4.info/s3-ui-nomenclature/.   A Live DMX Connection is Required Connect a DMX data […]

DMXio / DMXio-HG Transceiver User Manual

Wireless DMX A pair of RC4Magic Series 3 DMXio units replaces a DMX data cable in lighting control applications.  Configure one device as a transmitter, and one or more devices as receivers. Any number of DMXio receivers can be used. Thus, a multi-unit RC4Magic Series 3 system can take the place of […]